Attic Insulation in Milton, ON
We measure before we suggest anything. Then we sort the work into what needs doing now and what you can leave alone.
We do attic insulation in Milton on both sides of Highway 401, and we're about 27 km from the middle of town. Our crew drives out from Mississauga, measures what's already up there and tells you which job to do first.
Milton south of the 401
Highway 401 cuts Milton in two. North of it the town is mostly rural and industrial. South of it is mostly residential and commercial, so that's where most of the houses are, and most of the attics.
Timberlea went up in phases of detached and semi-detached houses, and the second phase was finished in 1979. An attic insulated back then could be due for a top-up. Someone may have topped it up since, though, or it may be doing fine as it is.
The build date doesn't tell us which, so we don't guess from it. We go up, run a tape measure down to the ceiling below, check what shape the old layer is in, and only then tell you whether your attic needs more.
Keep, fix or add
Dry insulation that's only a little thin can stay where it is. If that's what you've got, we'll tell you plainly to leave it, or to add depth later once anything more pressing is sorted.
Some things can't wait. Wet insulation, insulation that mice or squirrels have soiled or tunnelled through, frost or dark staining under the roof deck, a bathroom fan duct that stops in the attic instead of running outside: those come first. Wet or soiled insulation comes out, and our attic insulation removal page explains how we vacuum it out of the joist bays.
Air leaks are next. Warm air from the house gets up through gaps at the top plates, around ceiling light fixtures and along the hatch frame, and you can follow its path by the dark, dusty streaks it leaves in the insulation. Our crew seals those gaps and fits baffles at the soffit vents so outside air still moves up under the roof deck.
Depth goes on last. If the old layer is dry, a blown-in top-up goes straight over it, and we staple depth markers to the joists so you can check the finished level from the hatch yourself.
How far we come
We're about 27 km from Milton in a straight line, and we cover all of it, north of Highway 401 and south.
Most of our work is houses, but we also insulate plazas and light industrial units, so we'll take on a unit on the industrial side of the highway too. The rest of the towns and neighbourhoods we cover are on our home page.
Walls, foam and removal in Milton
If your exterior walls are empty or only partly filled, we can insulate them without opening up the rooms. We drill a row of holes into each stud cavity, dense-pack it, then plug and patch the holes. If a wall is already full, we leave it, and we'll tell you so before anyone picks up a drill.
Spray foam goes where batts fit badly and air slips past them. If your basement has a bare rim joist, the band of framing on top of the foundation wall, foam sprayed into each bay seals the gaps and insulates it in one coat. It's a fix-next job, done after anything wet or soiled in the attic.
Removal jumps the queue. If anything in your attic is damp or has had animals living in it, it comes out before walls or foam are even on the list. New insulation laid over a wet or soiled layer just hides the problem.
About Milton: Milton, ON on Wikipedia ยท Milton on Google Maps
FAQ
Insulation questions from Milton
Yes, we do attic insulation all over Milton, on the residential south side of Highway 401 and the rural and industrial north side. We measure the depth and check the condition of what's there first, then tell you whether it's a top-up, a removal or nothing at all.
A Timberlea attic is worth topping up if the insulation is dry and measures thin. If it's wet or soiled, it has to come out first. The second phase of Timberlea was finished in 1979, but the build date doesn't show what's been added since. If the layer is dry and close to full depth, we'll tell you to leave it.
Milton is about 27 km from us, measured in a straight line to the middle of town. The whole town is in our service area, on both sides of Highway 401.
Get a quote
Request an insulation visit in Milton
Call (437) 563-1473 or send the form. Tell us what you've noticed in the house, like a cold room, frost in the attic or a drafty floor. We'll look at the attic and give you a written list and a quote.




